| Name | Titanium Bar/Rod |
| Standard | ASTM B348,ASTM F136,ASTM F67,AMS4928 |
| Grade | Titanium Gr1,Gr2,Gr3,Gr4,Gr5(Ti-6Al-4V),Gr7(Ti-0.2Pd), Gr9(Ti-3Al-2.5V),Gr12(Ti-0.3Mo-0.8Ni))etc. |
| Diameter | 5mm~350mm |
| Certificates | ISO9001:2008. The third test report is available,such as SGS,TUV,BV |
| Shape | Round bar, Square /flat bar, Hexagonal bar, Rectangle bar |
| Techniques | Hot or cold rolling forging or annealed |
| Delivery time | 5-10 working days |
| Application | Industrial, Medical, Salt-making, Petrochemical, Metallurgy, Electronics, Chemical |
In order to ensure the service life of equipment products, we must use tcorrectly, and so is the titanium rod. Now, let Baoji
Lihua titanium introduce the precautions for using titanium rods:
First, when using titanium rods, pay attention to avoid scratches and collisions, and also pay attention to dust and oil.
Second, the working pressure during use must not exceed the rated working pressure, otherwise various problems will also
occur.
In normal use, there should be at least 3-5 minutes of low-pressure start-up time, the relative pressure difference should be
controlled below 0.5Mpa, and then the working pressure should be gradually adjusted to normal needs (higher pressure does
not exceed 0.4Mpa).
4. After the product runs for a certain period of time, the pressure may increase due to the clogging of the filter element, and
the flow rate will decrease. It needs to be recoiled or rewashed. The regeneration cycle depends on the rated pressure and flow.
1. Available Size and standards.
| Grade | Technology | Standard | Specification(mm) |
| Gr1.Gr2.Gr4.Gr5.Gr7. Gr9.Gr12. Gr5 Eli | Forging | ASTM B348 F136 F67 | Φ(60~350)X≤4000 |
| Rolling | Φ(6~100)X≤6000 |
2.Tolerance of diameter
| Diameter(mm) | h7 | h8 | h9 | h10 | h11 | h12 |
| Tolerance precision (um) |
| 3Max | 10 | 14 | 25 | 40 | 60 | 100 |
| 3~6 | 12 | 18 | 30 | 48 | 75 | 120 |
| 6~10 | 15 | 22 | 36 | 58 | 90 | 150 |
| 10~18 | 18 | 27 | 43 | 70 | 110 | 180 |
| 18~30 | 21 | 33 | 52 | 84 | 130 | 210 |
| 30~50 | 25 | 39 | 62 | 100 | 160 | 250 |
| 50~80m | 30 | 46 | 74 | 120 | 190 | 300 |
| 80~120 | 35 | 54 | 87 | 140 | 220 | 350 |
| 120~180 | 40 | 63 | 100 | 160 | 250 | 400 |
| "h"stands for a tolerance range(-x,+0),on the contrary,"H"stands for a tolerance(-0,+X) |
Related products
Titanium bolts and titanium machined parts(machind from titanium bar/rod)
Baoji Lihua ,a titanium manufacture, with over 15 years export experience.
Our advantagerous products is: titanium bar, titanium wire, titanium flange, titanium forging.
Welcome to contact!
